Additional Information; Connecting With Other Equipment; Using The Optional System Adaptor Kit Rm-D100K; Using The Optional Super Bit - Sony Walkman TCD-D100 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

( Additional Information

Connecting with Other Equipment

Connect other equipment to this tape-corder to enable flexible use of the tape-corder.
Notes on using the
optional RM-D100K
• Operate this tape-
corder with the AC
power adaptor.
Wireless remote control
functions and digital
input/output
connections may not
operate properly when
the unit is operating on
batteries.
• Do not leave the RM-
D100K in a place
subject to direct
sunlight, as this may
lead to a malfunction.
Note on using the
SBM-1
When operating the
optional SBM-1 with AC
power adaptor, the power
is supplied from this tape-
corder if the power of the
SBM-1 is turned off.
When this tape-corder is
operated with batteries,
disconnect the AC power
adaptor from the SBM-1
to conserve the battery.
Using the optional system adaptor kit
RM-D100K
The optional RM-D100K functions as a relay unit
between an equipment with digital I/O jack and this
tape-corder.
The RM-D100K supports input/output of both optical
and coaxial cables. Connect according to the jack of
the digital audio equipment you wish to connect.
TCD-D100
When the RM-D100K is connected
Combining the unit with a audio timer for timer
recording or playback, and using the Music Scan
function or Direct Search function on the supplied
remote commander are many of the noteworthy
features of the RM-D100K.
Using the optional Super Bit Mapping
adaptor SBM-1
The optional SBM-1 enables recording of higher
quality when connected to this tape-corder.
TCD-D100
The optional RMT-D100 can be connected to the
SBM-1 to enable remote control.
However, when operating the SBM-1 with the
batteries, the RMT-D100 is not operational if the
power of the SBM-1 is turned off. When operating the
SBM-1 with the AC power adaptor, the RMT-D100 is
operational regardless of whether the power of the
SBM-1 is turned on or off.
to (OPTICAL) I/O
RM-D100K
to (COAXIAL) I/O
SBM-1
Additional Information
DAT deck,
CD, MD,
etc.
Microphone
(not supplied)
37
EN

Publicité

Chapitres

Table des Matières
loading

Table des Matières