Writing Start Ids During Playback - Sony Walkman TCD-D100 Mode D'emploi

Notes
• When AUTO-ID is
turned on, the Start ID
may not be written
properly if there is
noise in the sound
source.
• When writing Start IDs
continuously, make
sure that there is an
interval of 9 seconds or
longer (18 seconds or
longer in the LP mode)
between the start IDs.
Otherwise, the tape-
corder may not locate
the beginning of a track
correctly.
• When AUTO-ID is
turned off during
digital connection, the
existing program
(track) information of
the CD may not be
written properly as the
Start ID depending on
the CD player in use.
• The existing program
(track) information of
an MD is not written as
the Start ID.
Notes
• Start IDs which were
written during
recording or written
after the selected point
cannot be moved.
To move the Start IDs,
rewrite it after erasing.
• Start IDs cannot be
written while
is flashing rapidly
during the Rehearsal
function.
To write Start ID when AUTO-ID is turned on
Source A Start ID is written when
All • Recording begins or the recording pause is
released. (During a soundless segment,
Start ID is written at the point where
sound is emitted.)
• A sound is input after a soundless segment
or a segment with a very low recording
level of 3 seconds or longer.
• The START ID•ENTER button is pressed
during recording.
To write Start ID when AUTO-ID is turned off
Source A Start ID is written when
All • Recording begins or the recording pause is
released. (Start ID is written regardless of
whether the segment contains a sound or
not.)
• The START ID•ENTER button is pressed
during recording.
CD player Identical to the existing track
(digital input) information of the CD. (In addition to the
above.)
DAT player Identical to the existing track
(digital input) information of the DAT tape. (In addition
to the above.)

Writing Start IDs during playback

You can write a Start ID anywhere you want without
erasing the contents of the existing recording.
1
Press the START ID•MODE button on
the main unit repeatedly until "AUTO ID" appears
(to turn on AUTO-ID) or disappears (to turn off
AUTO-ID).
2
Press the START ID•ENTER button during
playback where you want to rewrite.
" " flashes when
you select the point for
Start ID. The tape-corder
plays back the segment of
the tape up to 3 seconds
from the point and
repeats it 16 times (Rehearsal
function).
27 EN
Recording