Recording On A Tape - Sony HST-SE581 Mode D'emploi

Playing a tape (continued)
Tip
To play a tape recorded with the Dolby NR system,
set DOLBY NR to B.
The Dolby NR (noise reduction) system eliminates
tape hiss noise by boosting low-level signals in the
high-frequency range during recording, then
lowering them during playback.
18 EN

Recording on a tape

You can record from CD, or just the songs
you want to record from the middle of the
tape.
See "Recording from a tape" (page 20) to
make a copy of the tape.
You can use TYPE-I (normal) or TYPE-II
(C O ) tapes. The recording level is
r 2
automatically adjusted.
1
POWER
0 )
p ª ·
§
5
1
Press one of the function buttons to
select the sound source to be
recorded.
2
Press § and insert a blank tape into
deck B.
With the side you
want to record on
facing you
3
Set DIRECTION to select the side(s)
to be recorded on.
Set to A to record on one side. Set to
a to record on both sides*.
3
DOLBY NR
P R r
0 )
p ª ·
§
2 5 4
p ª