Sony HST-SE581 Mode D'emploi page 6

Step 1: Hooking up the system
(continued)
6
Connect the CD player.
Use the audio cord, matching the color
of the plugs and the jacks.
Insert the plugs firmly, pushing them in
all the way.
OK
7
Set VOLTAGE SELECTOR to the
position of your local power line
voltage (only on models supplied
with a voltage selector).
220–240V
8
Connect the AC power cord from
the CD player to the AC OUTLET
on the system.
By connecting the AC power cord from
the CD player to the AC OUTLET, you
can turn on/off the CD player
automatically when you turn on/off the
system.
EN
6
N.G.
110–120V
European, Australian, Singaporean and
Malaysian models
Other models
9
Connect the power cord from the
system to a wall outlet.
Inserting two R6 (size AA)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
]
}
}
]