Transport And Storage - HEROSE 4182 Notice D'utilisation

WARNING
Risk of injury if maintenance work is done incorrectly!
Incorrect maintenance can lead to serious injury and considerable material damage.
 Before the start of work, ensure there is sufficient room for doing the work.

Ensure the space around the work is tidy and clean! Parts and tools in loose piles or lying around
are hazard sources.

If parts have been removed, take care to assemble correctly and re-install all attachment items.
 Before putting back into service, ensure:
 All maintenance work has been carried out and completed.
 There are no persons in the hazard area.
All covers and safety devices are installed and operating correctly.

CAUTION
Cold/hot pipelines and/or valves.
Risk of injury due to thermal influences!
 Insulate valves.

Attach warning signs.
Medium escaping at high speed and high/low temperature.
Risk of injury!

Wear the prescribed protective equipment
NOTICE
Impermissible stresses arising from operating conditions and extensions / added structures.
Leakage or rupture of the valve body!
 Provide suitable support.
 Additional loads, such as traffic, wind or earthquakes, are not explicitly taken into account by
default and require separate sizing.
Condensation in air conditioning, cooling and refrigeration plants.
Icing!
Blocking of the actuation mechanism!
 Damage due to corrosion!
 Insulate valves with diffusion-tight material
Improper mounting.
Damage to the valve!
 Remove cover caps before mounting.

Clean the sealing surfaces.
 Protect the body against hammering.
Painting of valves and pipelines.
Functional impairment of the valve / loss of information!
 Protect stem, plastic parts and type plate against the application of paint.
Impermissible stress
Damage to the control mechanism!

Do not use the valve as a foothold.
Exceeding the maximum permissible operating conditions.
Damage to the valve!

The maximum permissible operating pressure must not be exceeded, and the minimum and
maximum allowable operating temperatures must be observed.
3

Transport and storage

3.1 Inspection of condition on delivery

Inspect the valve for damage upon receipt.
In case of transport damage, determine and document the precise extent of the damage, and
report it immediately to the supplying dealer/carrier and the insurer.
Operating instructions
herose.com
17