Limescale Removal; Règles De Sécurité - Rotel La passione PLUS Mode D'emploi

anticlockwise. Wipe the steamer spindle with a damp cloth and soap the cylindrical
part. Make sure that the small hole at the top of the steamer is clean before
refitting the part. Fit the steamer on its spindle, screwing it clockwise.

Limescale removal

To maintain your Espresso machine in perfect condition you should carry out this
limescale removal procedure 1-3 times a year, depending on the lime content of your
water. We recommend that you use our limescale removal product Calc Clean 2000.
(1 litre bottles, Art.No. 226.900.0006).
1. Pull out the mains supply plug.
2. Take off the infusion mesh (18) (undo the screw).
3. Pour limescale removal solution (according to the instructions on the packaging)
into the water tank (7).
4. Place a vessel under the infusion head (18)
5. Plug the appliance back in and heat up using the On/Off switch (1).
6. Turn the Espresso switch (2) to the left and allow the limescale removal solution to
flow out of the infusion head (18) for ca. 1 minute.
7. Turn back the rotary switch (2).
8. Switch off the machine by pressing the On/Off switch (1) and allow the solution to
act for ca. 5 minutes.
9. Repeat this procedure two or three times until the entire contents of the water tank
containing the limescale removal product has flowed through the infusion head.
10. After limescale removal, rinse out the water tank (7) thoroughly and then fill with
fresh water.
11. Heat up the appliance once more using the On/Off switch (1) and turning the rotary
switch (2) to the left. Flush out the machine thoroughly. (ca. 1 litre of fresh water)
12. Pull out the mains supply plug. Leave the machine for ca. 1 hour to cool down and
then replace the infusion head (18).
13. Your coffee machine is once more ready for use.
MODE D'EMPLOI
Règles de sécurité
- Lisez ces instructions avant d'utiliser la cafetière.
- Ne branchez pas la cafetière avant d'avoir vérifié que la tension figurant sur la
plaque signalétique correspond bien à celle de votre domicile.
- Ne faites pas fonctionner la cafetière sans eau dans le réservoir.
- A certains moments, il est possible que de la vapeur et de l'eau s'échappent par la
zone du passage du café. Cela n'est ni une anomalie, ni un mauvais
fonctionnement.
Cette cafetière espresso est un modèle professionnel à haute pression (18 bars),
-
elle incorpore une pompe électrique pour extraire du café tout son arôme et son
11
FRANCAIS