Inserting The Batteries; Charging The Batteries; Setting The Display Language; Automatic Answering - switel DC41 Série Mode D'emploi

Inserting the batteries

Open the battery compartment cover. Insert the batteries in the battery
compartment. Close the battery compartment.

Charging the batteries

The handset warms up during the charging process. This is normal and
does not represent a risk. Do not charge the handset with charging units
from other manufacturers. The battery charge status is indicated in the dis-
play. When the battery charge has reached its lower limit, the battery icon
n flashes in the display and an acoustic alarm signal is issued (if the option
is switched on / menu item
It indicates approx. 10 minutes call time is remaining.
Setting the time and date on the handset
When started up for the first time, the handset does not indicate the correct
time (e.g. for entries in the call list/answering machine). The date and time
are set using the menu option

Setting the display language

The display language can be set to one of the 11 different languages avail-
able. When delivered, the language is set to Deutsch" (German). Change
the setting using the menu option

Automatic answering

If the Auto Answer function is activated (default state on delivery), a call is
automatically taken on removing the handset from the base station. The
automatic answering function is activate/deactivated using the menu option
HS SETTINGS
Only use NiMH rechargeable batteries of the type AAA cell, 1.2
V / 500 mAh! Never use standard batteries/primary cells! Pay at-
tention to correct polarity.
Before the handset is used for the first time, insert it in the base
station/charging station for at least 16 hours.
HS SETTINGS
HS SETTINGS
AUTO ANSWER
> .
TONE SETUP
> >
DATE & TIME
>
HS SETTINGS LANGUAGE
>
BATTERY TONE
).
.
.
79