Selection of sanding sheet
Grain size P
Application
forpre-sandingroughwood
P 60
surfaces
P80/120
forplainsanding
forfinesandingofprimed
P 240
andpaintedsurfaces
Scraping
• Useahighoscillationratewhenscrap-
ing.
• Workusinglowpressureandatalow
angle in order not to damage the sub-
strate material.
Cleaning/Maintenance
Repairandservicingworknot
described in this manual should
always be carried by our Service
Centre.Useonlyoriginalparts.
Switch off the device and remove
the battery from the device before
workingwithortransportingit.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
Cleaning
Do not spray the appliance
with water and do not im
merse it in water. Electric
shock hazard!
• Keepcleantheventilationslots,motor
housingandhandlesoftheappliance.
Useadampclothorabrush.
Do not use cleaning agents or solvents.
Youmayotherwiseirreparablydam-
agetheappliance.
Maintenance
• Theequipmentismaintenancefree.
Storage
• Storethedeviceinadryplacewellout
of reach of children.
• Storetheequipmentbetween0 °Cand
45 °C.Duringstorage,avoidextreme
cold or heat so the battery does not
losepower.
•
Remove the battery before storing the
unitforlongerperiodsoftime.
• Storethebatteryonlyinapartially
charged state. The state of charge
shouldbe40–60%overalonger
storageperiod(twoLEDlightsonthe
chargestatusdisplay(
nate).
• Duringalongerstorageperiod,check
the state of charge of the battery and
recharge if necessary roughly every
3 months.
WasteDisposal/Envi
ronmental Protection
Remove the battery from the device and
takethedevice,battery,accessoriesand
packagingforenvironmentallyfriendly
recycling.Instructionsonhowtodispose
of the rechargeable battery can be found
intheseparateinstructionmanualforyour
battery and charger.
Electricunitsdonotbelongwith
domestic waste.
GB
IE
9a)illumi-
41