Pause Mode; Cooking-Timer/Alarm - Atag HC6471E Mode D'emploi

OPERATION

Pause mode

Activate pause mode
1. Press the pause key until you hear a beep.
▷ The cooking zone display will show the 'pause indicator'. The hob is now in pause mode.
De-activate pause mode
1. Press the pause key until you hear a beep.
The indicator above the pause key will flash.
▷
2. Press somewhere on the slide control or cooking level display.
The active settings can be read in the display.
▷

Cooking-timer/alarm

Setting the cooking-timer
1. Select the desired cooking zone and set the power level.
2. Touch the timer display.
The timer indicator of the relevant cooking zone flashes.
▷
3. Use the slide control to adjust the desired time.
First set a value in the right display and wait until the figure no longer flashes and a dash
▷
appears in the left display. Then set the left display (if a preset time longer than
9 minutes is required).
The selected cooking zone will switch off automatically once the set time has elapsed.
▷
An alarm signal will sound.
▷
4. Press the slide control to switch off the signal.
EN 15