Recording; Connecting With Other Equipment For Recording; Recording From Analog Audio Equipment With A Line Out Jack - Sony PCM-M1 Mode D'emploi

( Recording

Connecting with Other Equipment for
Recording
You can connect the recorder to other analog audio equipment or audio equipment
with digital output. Refer to page 16 for "Recording".
Tip
When recording with
analog connection, you
can adjust the digital copy
code (ID 6) (see page 28).
Recording from analog audio
equipment with a LINE OUT jack
(Analog connection)
PCM-M1
to MIC/LINE IN
1
Set the MIC/LINE IN switch to LINE IN.
2
Select the recording mode using the MANUAL •
MIC LIMITER • AUTO (AGC) selector.
MANUAL: adjust recording level manually (see
page 25)
AUTO (AGC): recording level will be adjusted
automatically
3
Select sampling frequency using the SP • LP
switch.
SP (48kHz, 44.1kHz): normal recording mode.
LP: long continuous recording mode. Sampling
will be done by 32kHz. (see page 27)
4
Press the r REC and P PAUSE buttons.
5
Press either the ( PLAY or P PAUSE button to
begin recording. Then, begin playback of the
connected source.
Audio connecting cable
RK-G129
(not supplied)
to LINE OUT
Stereo unit
or mixer,
etc.
23
Recording
EN