Writing Start Ids During Playback - Sony PCM-M1 Mode D'emploi

Note
Start IDs cannot be
written while
flashing rapidly during
the Rehearsal function.
2
Press RESET • + or COUNTER
• – repeatedly and select "LEV
SID".
3
Press CLOCK/SET.
4
Press RESET • + or COUNTER • – repeatedly and
select the threshold value of your choice. With
each press, the display will change as follows.
– 50
5
Press CLOCK/SET.
The display returns to the clock.

Writing Start IDs during playback

You can write a Start ID anywhere you want without
erasing the contents of the existing recording.
is
1
Press the START ID • MODE button on
the main unit repeatedly until "AUTO ID" appears
(to go into the auto mode) or disappears (to go into
the manual mode).
2
Press the START ID • ENTER button during
playback where you want to rewrite.
"REHRSAL" flashes when
you select the point for
Start ID. The recorder plays
back a 3 second segment
repeatedly, up to 16 times
(Rehearsal function).
The current threshold
value and the peak
indication meter will
flash.
– 40 – 32 – 24
– 00 – 02 – 04
- -dB
– 18 – 12
– 06 – 08
Recording
33 EN