Sony PCM-M1 Mode D'emploi page 21

Tips
• If the recorder remains
in the pause mode for
five minutes or longer,
the recorder will
automatically enter the
stop mode in order to
protect the head and
tape.
• If the recorder remains
in the stop mode for
three minutes or longer
while using the unit on
batteries, the recorder
will enter the low-
power consumption
mode automatically (see
page 41) to protect the
tape and to conserve the
battery.
Notes
• If you set the volume
too high, the sound may
become distorted. Turn
down the volume in this
case.
• The AMS function will
not operate if the Start
IDs are not written. (See
page 30).
• The AMS function may
not operate properly
with a DAT cassette
recorded on other DAT
decks.
* Automatic Music Sensor
To fast-forward/rewind while monitoring the
sound
You can fast-forward (cue) or rewind (review) while
monitoring the sound.
Cue
Review
( ) is indicated for the remote control.
To high speed cue/review
This function can be operated only from the main unit.
High speed cue
High speed review
To locate the beginning of a track—AMS* function
You can locate the beginning of a track in the playback, fast-
forward/rewind, and stop modes.
Playback mode: Press ) + (+) or = 0 (=)
quickly.
Fast-forward/rewind mode: Press ) + (+) or =
0 (=) once.
Stop mode: Press ) + (+) or = 0 (=) twice.
To locate the beginning
of the next/succeeding
program (track)
E.g.: When locating the
beginning of the
fifth succeeding
program (track)
To locate the beginning
of the current/previous
program (track)
E.g.: When locating the
beginning of the
fourth previous track
including the current
program (track)
( ) is indicated for the remote control.
Press and hold ) + (+)
in the playback mode. When the
button is released, normal
playback resumes.
Press and hold = 0 ( =)
in the playback mode. When the
button is released, normal
playback resumes.
Press ( PLAY and ) +
during playback.
Press ( PLAY and = 0
during playback.
Press ) + (+) once/
repeatedly
Press = 0 (=) once/
repeatedly
Playing Back
21 EN