Configuration And Remote Control - dB Technologies VIO W15T Manuel D'utilisation

2.2. CONFIGURATION AND REMOTE CONTROL

The AURORA NET software allows you to manage in real time several parameters of the VIO W15T monitor. In
particular:
•
Monitor both the main input and output signals as well as the signal on both acoustic
components
•
View the presence of audio compression on the acoustic components
•
Attenuate the input signal in steps of 0.5 dB
•
Add filters to adapt the frequency response of the stage monitor to your requirements
•
Adjust the gain and add delay
•
Select the cut-off frequency to apply to the high-pass filter with preset values ranging from 55
to 120 Hz
•
MUTE the main channel as well as the individual woofer and driver channels
•
Listen to the stage monitor in SOLO mode, or to each of the woofer and driver channels
•
Monitor the temperature of the amplifier and the power supply unit
•
Save the settings made using AURORA NET to the DSP of stage monitor for subsequent recall
by pressing the DSP Preset button on the control panel (Service/User mode)
For further information, refer to the specific manual for the AURORA NET software.
VIO W15T
28
English
Cod. 420120335 REV. 1.0