General Information; Welcome; Introductory Overview; User Information - dB Technologies VIO W15T Manuel D'utilisation

English

1. GENERAL INFORMATION

WELCOME!

Thanks for purchasing a product that was designed and developed in Italy by dBTechnologies! This professional
active monitor embodies years of experience and innovation in the field of sound reproduction, with the use of
cutting edge solutions in the fields of acoustics, electronics and materials research.

INTRODUCTORY OVERVIEW

The VIO W15T is an active 2-way coaxial stage monitor.
It is equipped with a 15" woofer (voice coil: 3") and a 1.3" compression driver (voice coil: 3") driven by a 1600 W
RMS DIGIPRO G4 amplifier of the latest generation.
The key features include:
•
the rotatable horn allows the monitor to be adapted to multiple applications
•
integrated DSP with linear-phase FIR filters for accurate reproduction of the audio signal
•
complete connectivity for remote control, thanks to the RDNet module and full integration
with the AURORA NET control software
•
a high quality plywood cabinet, protected by a tough polyurethane paint finish, which makes
it rugged enough for use in all scenarios, both indoors and out
•
the possibility for mounting on a wall, pole or truss adapter using the optional support
bracket WB-W15T

USER INFORMATION

To get the best use out of your VIO W15T, we recommend that you:
•
read the Quick Start manual included in the package and all of this complete User Manual,
and keep them throughout the entire life of the product.
•
register the product on the website http://www.dbtechnologies. com in the "SUPPORT"
section.
•
download and install the latest version of the firmware from the website
http://www.dbtechnologies.com in the "DOWNLOADS" section (see the chapter
THE
•
retain your proof of purchase and WARRANTY (User Manual "section 2").
VIO W15T
FIRMWARE).
UPDATING
Cod. 420120335 REV. 1.0
21