Power Section - dB Technologies VIO W15T Manuel D'utilisation

English
5. AUDIO INPUT AND LINKING ("Balanced audio")
Input and output compatible with balanced XLR cables.
In particular:
•
"Input" is used for the connection of the audio signal from the mixer or from another
speaker;
•
"Output Link" is used to relay the signal on to other devices in a daisy-chain configuration.
6. DSP PRESET
Pressing the button changes the acoustic parameters in accordance with the preset values saved in memory.
You can in fact tailor the EQ of the monitor to suit your requirements using the AURORA NET software and save
the settings made in the Service/User preset.

POWER SECTION

7. MAINS FUSE
Mains fuse holder.
8. MAINS LINK
Compatible with powerCON TRUE1® connectors to link the
power supply to other modules.
9. FULL-RANGE MAINS INPUT
Compatible with powerCON TRUE1® connectors. Full-range
power supply
CAUTION!
•
The system comes with a fuse already
fitted for operation in the 220-240 V
range. If you need to operate it in the
100-120 V range:
1. Disconnect all connections, including
the power supply.
2. Wait for 5 minutes.
3. Replace the fuse with the one
supplied in the package for the 100-
120 V range.
4. Only use the power cable provided.
•
The USB SERVICE DATA connection is
to be used exclusively for updating
the product's firmware; do not connect any other USB device to the unit to avoid the risk
of damage and malfunction.
•
Do not use the monitor for a prolonged period with the limiter LED steadily lit or
flashing as this indicates operation under stress with excessive distortion.
VIO W15T Cod. 420120335 REV. 1.0
25