First Power-On; Package Contents; Installation; Placement Of The Monitors And Audio Connections - dB Technologies VIO W15T Manuel D'utilisation

2. FIRST POWER-ON

PACKAGE CONTENTS

On opening the VIO W15T monitor package, check that no items are missing. The package contains:
•
power cable with POWERCON® TRUE1 connector
•
VIO W15T
•
quick start manual and warranty documentation
•
fuse for operation with a supply voltage in the range 100-120V
CAUTION!
The system comes with a fuse already fitted for operation in the 220-240 V range. If you need to operate it in
the 100-120V range:
1. Disconnect all connections, including the power supply.
2. Wait for 5 minutes.
3. Replace the fuse with the one supplied in the package for the 100-120V range.
4. Only use the power cable provided.

2.1. INSTALLATION

PLACEMENT OF THE MONITORS AND AUDIO CONNECTIONS

When positioning the VIO W15T monitors, consider the area of coverage required and the positions and
characteristics of the microphones used to avoid the possibility of feedback (Larsen effect).
To connect 2 or more monitors to the same audio source, it may be useful in various types of installation to relay
the signal from the first monitor to a second monitor, and so on. To do this, first connect an audio source to the
INPUT of the first monitor.
Then connect a balanced XLR cable to the OUTPUT LINK of the first monitor and the INPUT of the second.
This second step can then be repeated to link additional monitors.
SORGENTE
AUDIO SOURCE
VIO W15T
26
AUDIO
English
Cod. 420120335 REV. 1.0