Safety Information - EXFO EPM-50 Guide D'utilisation

Safety Information

2 Safety Information
Do not install or terminate fibers while a laser source is active. Never
look directly into a live fiber and ensure that your eyes are protected
at all times.
Use of controls, adjustments and procedures for operation and
maintenance other than those specified herein may result in
hazardous radiation exposure.
Your instrument is a Class 1 laser product in compliance with standards IEC 60825-1
and 21 CFR 1040.10. Laser radiation may be encountered at the output port.
The following label indicates that a product contains a Class 1 source:
Note:
The label is affixed to your product.
W
ARNING
W
ARNING
CLASS 1
LASER PRODUCT
4