I-Tech Sonicstim Manuel D'utilisation page 31

SONICSTIM The product is intended for use in an electromagnetic environment in which
radiated RF disturbances under control. The customer or the user of the device can help
prevent electromagnetic interference by maintaining a minimum distance between portable and
mobile communication devices in RF communications equipment (transmitters) and the device
as recommended below, according to the maximum output power of the devices radio
communications.
Rated maximum
output power of the
transmitter (W)
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum rated power output of the transmitter in
watts (W) according to the transmitter manufacturer.
Note:
(1) At 80 MHz and 800 MHz, the higher frequency range
(2) These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
Le logo
IACER Srl
Separation distance according to frequency of transmitter (m)
from150kHz to
80MHz
d = 1,2 P
0,12
0,38
1,2
3,8
12
est la propriété exclusive de I.A.C.E.R. Srl et est enregistré
From 80MHz to
800MHz
d = 1,2 P
0,12
0,38
1,2
3,8
12
31 de 36
From 800MHz to 2GHz
d = 2,3 P
0,23
0,73
2,3
7,3
23
MNPG43 Rév. 05