Sony HT-CT390 Mode D'emploi page 17

Menu items
"HDMI>" "CTRL"
(Control for HDMI)
"TVSTB"
(Standby Linked to
TV)
"COLOR"
(HDMI color)
"BT >" "BTAAC"
(BLUETOOTH) (BLUETOOTH
Advanced audio
coding)
"BTSTB"
(BLUETOOTH
standby)
"INFO"
(BLUETOOTH
device information)
"WS >" "LINK"
(Wireless (Secure Link)
sound)
"USB >" "REPT"
(Playback mode)
"SYS >" "ASTBY"
(System) (Auto standby)
"VER"
(Version)
Function
• "ON": The Control for HDMI function is enabled. Devices
connected with an HDMI cable can control each other.
• "OFF": Off.
This function is available when you set "CTRL" to "ON".
• "AUTO": If the input of the system is "TV", the system turns
off automatically when you turn off the TV.
• "ON": The system turns off automatically when you turn
off the TV regardless of the input.
• "OFF": The system does not turn off when you turn off the
TV.
• "AUTO": Automatically detects the type of external device,
and switches to the matching color setting.
• "YCBCR": Outputs YC
• "RGB": Outputs RGB video signals.
You can set whether or not the system uses AAC via
BLUETOOTH.
• "ON": Enable AAC codec.
• "OFF": Disable AAC codec.
Note
If you change the "BTAAC" setting when a BLUETOOTH
device is connected, the codec setting is only reflected after
the next connection.
When the system has pairing information, the system is in
BLUETOOTH standby mode even when it is turned off.
• "ON": BLUETOOTH standby mode is enabled.
• "OFF": BLUETOOTH standby mode is disabled.
The detected BLUETOOTH device name and device address
appear in the top panel display.
"NO DEVICE" appears if the system is not connected to a
BLUETOOTH device.
• "ON": You can specify the wireless connection to link the
Bar Speaker to the subwoofer using the Secure Link
function (page 21).
• "OFF": Off.
• "NONE": Plays back all tracks.
• "ONE": Repeats one track.
• "FLDER": Repeats all tracks in a folder.
• "RANDM": Repeats all tracks in a folder in random order.
• "ALL": Repeats all tracks.
• "ON": Turns on the auto standby function. When you do
not operate the system for about 20 minutes, the system
enters standby mode automatically.
• "OFF": Off.
The current firmware version information appears in the top
panel display.
C video signals.
B R
17
US