Daily Cleaning; Weekly Cleaning - Rex-royal The Touch of Taste S300 Mode D'emploi

Masquer les pouces Voir aussi pour The Touch of Taste S300:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DAILY CLEANING

Drinks outlet with milk module
1.
The machine must be switched-off.
2.
Remove the outlet cover (P .1).
3.
The catch handle (P .2) open.
4.
Drag down the milk outlet (P .3), the spout tube (P .4) and the connecting
piece (P .5).
5.
Clean all parts thoroughly.
6.
Clean the nozzles with the special brush (S6).
7.
Put the parts in reverse order, together again.
8.
Check the tubes! There should be no kinked.
Steam outlet
1.
Fill the milk jug with 0.7 litre water and 60ml or 2 measuring cups cap-
pucleaner.
2.
Unscrew the steam nozzle from the steam outlet and place it in the milk
jug.
3.
Hold the steam outlet by the black handle and plunge into the jug.
4.
Press the STEAM KEY and foam the cleaning fluid.
5.
Clean all parts thoroughly.
6.
Put the parts in reverse order, together again.
Powder module
1.
The machine must be switched-off.
2.
Open the front door.
3.
Turn up and remove the powder injection. Clean and dry the powder
tubes (P .1).
4.
Remove the cup interlock; counterclockwise (P .2).
5.
Remove the mixer cup and the mixer cup ring.
6.
Clean all parts thoroughly and wait until they are dried.
7.
Put the parts in reverse order, together again.

WEEKLY CLEANING

Intensive cleaning drinks outlet (with milk)
1.
The machine must be switched-off.
2.
Remove the outlet cover (P .1) and open the catch handle (P .2).
3.
Drag down the milk outlet (P .3), the spout tube (P .4) and the connecting
piece (P .5).
4.
Remove the piece of mixture (P .7) with the nozzle (P .8) and the handle
owner (P .9) from the milk outlet.
5.
Remove the coffee outlet (P .10).
6.
Pull carefully the powder outlet from the mounting plate and pull
you the piece of discharge of the hose.
7.
Clean all parts thoroughly.
8.
Clean the nozzles with the special brush (S6).
9.
Put the parts in reverse order, together again.
10.
Check the tubes! There should be no kinked.
Operating Instructions - S300
Operating Instructions - S300
P .5
(S6)
P .2
P .9
P .8
P .11
P .10
P .5
(S6)
P .2
P .1
P .4
P .3
P .1
P .2
P .7
P .1
P .4
P .3
53
53

Publicité

Table des Matières
loading

Table des Matières