Wirelss Channels Selectable - Sony WRR-800A Mode D'emploi

Wirelss Channels Selectable

The unit stores seven groups of selectable channels:
groups 00 (94 channels), 11 (11 channels), 12 (8 channels),
13 (8 channels), A1 (8 channels), A2 (7 channels) and A3 (7
channels).
Channel groups other than group 00 are designed so that all
channels of one group can be used simultaneously within the
same UHF wireless microphone system without causing
intermodulation. It is therefore recommended that you
usually use a channel group other than group 00 unless the
use of group 00 is specifically necessary.
Each "wireless channel" is represented by a 2-digit TV
channel number and a 2-digit number, for example: 68-23.
Note
To eliminate interference or noise, please note the
following.
• Do not use two or more wireless microphones or
transmitters whose wireless channels are the same.
• If there is a TV broadcasting station nearby, to avoid
possible interference from its broadcasting, do not use that
station's channel.
• The number of wireless microphone channels actually
usable in a multi-channel system may be smaller than the
normal capacity of that system if there is interference from
TV broadcasting or other RF signals.
............................................................................................................................................................................................................................................................
1) The distance depends on the operating environment and conditions.
6
• When operating two or more UHF wireless microphone
systems using the same wireless channel in the same
group, ensure that the systems are at least 100 m (330
1)
feet) apart as far as they are installed within sight of each
other.