Abridged Instructions On Measurement - visocor OM40 Mode D'emploi

B
Please read the detailed Instructions for Use
before measuring for the first time (from page
41 onwards).
1. Insert batteries
2. Fit the cuff
Bare your left arm.
Place the cuff round your upper arm:
The bottom edge of the cuff should be 2-3
cm above the elbow and the hose should
be at the middle of the inside of the elbow.
Important!
The mark (approx. 3 cm bar) has to be
directly above the artery running along the
inside of the arm.
Close the cuff and connect it up to the
device.
GB-32

Abridged instructions on measurement

Stretch out your left arm and place it on a
table, with the palm facing up. Keep your
arm still and do not talk.
For cuff sizes see Specifications and the table
of measuring errors and operating errors