Abridged Instructions On Measurement - visocor HM40 Mode D'emploi

B
Please read the detailed Instructions for Use
before measuring for the first time (from page
39 onwards).
1. Insert batteries
(2 x 1.5 V alcaline-mangane batteries)
2. Fit the cuff
Bare your left wrist.
Bare your left wrist, remove any watch or
jewellery. Place the device round the wrist.
The distance between the top edge of the
cuff and the palm should be approx. 1 cm
(Fig. 1). Close the cuff. Keep the device at
heart level (Fig. 2). Keep your arm still and do
not talk.
GB-36

Abridged instructions on measurement

Fig. 1
Fig. 2