Memory Recall; Delating The Memory - visocor HM40 Mode D'emploi

C

6. Memory recall

The device has a memory which makes it
possible to display the last 30 blood pressure
levels and pulse values measured and to
indicate the mean (average). If you press the
Memory button, the mean value will appear
provided 2 measurements have already been
saved. The mean is indicated by „A" and the
number of results saved.
Pressing again calls up the last value meas-
ured. Pressing again displays the previous
measurement as the case may be. In this
way you can call up all 30 measurements
backwards. If more than 30 measurements
have been saved, the oldest measurement
(no. 30) is deleted in order to record the
latest measurement (no. 1). If the button is
pressed again, the mean of all the measure-
ments appears.
GB-44
Operation of the device
7. Deleting the memory
To delete individual measurements, press the
Memory button a number of times to call up
the measurement required, press again and
keep the button pressed for 8 - 10 seconds
until the measurement has disappeared. To
delete the entire memory, call up the mean,
press the Memory button again and keep
it pressed until the mean has disappeared
(8-10 sec).
If the display flashes, the deleting process has
not been completed and must be repeated.