Deleting The Memory; Important Information; Basic Rules For Blood Pressure Measurement - visocor OM40 Mode D'emploi

D

5. Deleting the memory

To delete all the measurements, hold down
the M button (with the device switched off)
until LCD display disappears and then let go
of the button.
Important
If no batteries have been inserted, the
memory will be deleted when the mains plug
is removed from the socket.
GB-38

Important information

1. Basic rules for blood pressure
measurement
• Measurement must be performed when
you are at rest. Blood pressure is increased
by walking and climbing stairs. Wait at
least 5-10 minutes until your circulation
has calmed down.
• Check your blood pressure twice a day
– in the morning after getting up, and in
the evening when you have relaxed after
work.
• Blood pressure must be measured when
you are seated. For measurement, sit
down at your dining table (never at a low
coffee table) in as relaxed and upright a
posture as possible, support the arm and
back, and do not cross your legs.
• The most reliable way of obtaining inac-
curate figures is to perform measurement
on the bare arm. Wearing light clothing,