Metrological Inspection - visocor OM40 Mode D'emploi

G
• EN 1060-4 Part 4:2004
Non-invasive sphygmomanometers
Part 4: Test procedure for establishing
accuracy
• This product conforms to Council Direc-
tive 93/42/EEC of 14 June 1993 on Medical
Devices.
Manufacturer:
UEBE Medical GmbH
Zum Ottersberg 9
97877 Wertheim
Germany
GB-50

Metrological inspection

(previously calibration)
Generally, a metrological inspection is to be
recommended at intervals of 2 years. Profes-
sional users, however, are under obligation in
accordance with the "Medical Devices Operator
Ordinance". The inspection can be performed
either by UEBE Medcial GmbH, an authority
responsible for metrology or authorised mainte-
nance service centres.
Competent authorities and authorised main-
tenance service centres can obtain a "Test
Procedure for Metrological Inspections" from
the manufacturer on request.
Important:
This device must not be modified in any way
without permission from the manufacturer.
For example, it must not be opened (except to
change the batteries).
Appendix