Specifications; Electrical Connection - WIKA PGT23.100 Mode D'emploi

9. Specifications

9. Specifications
DANGER!
Danger to life due to loss of explosion protection
The non-observance of the instructions for use in hazardous areas can lead to
the loss of the explosion protection.
EN
▶ Adhere to the following limit values and instructions.
▶ The case contains parts made of non-metallic material, which could be
adversely affected by environmental conditions. It must be ensured that
the non-metallic parts are not damaged as a result of the environmental
conditions.
Non-metallic parts of the case
PUR, TPU, PA 6, EPDM, NBR (option), FMQ (option)

9.1 Electrical connection

Standard cable socket
Cable socket, fitted on the right-hand side of the case.
Material: PA 6, black
Per VDE 0110 insulation group C/250 V
Cable gland M20 x 1.5 (facing downwards) with strain relief
6 screw terminals + PE for conductor cross-section 1.5 mm²
Cable outlet
Cable length 2 m or 5 m, facing downwards and to the right
Material: PVC
Miniature connector
Miniature connector M8 x 1, 4-pin
26 Pressure gauges with output signal, optionally for hazardous areas