3. Safety
Product label Ex version (example)
Model + transmitter electronics
Article number
Serial number
Date of manufacture (month/year)
Ex marking
Before mounting and commissioning the instrument, ensure you read the
operating instructions!
Risk of burns!
Potentially dangerous situation caused by hot surfaces.
The instrument bearing this mark is a safety pressure gauge with a solid baffle
wall in accordance with EN 837, safety version "S3".
Do not dispose of with household waste. Ensure a proper disposal in accord-
ance with national regulations.
Additional label for Ex version
For instruments with PTFE lining and Ex marking: II 2G Ex ia IIC T6/T5/T4 Gb
For instruments with PTFE lining, measures must be taken in the lining area, if necessary, in
order to exclude electrostatic charging.
Pressure gauges with output signal, optionally for hazardous areas
Case filling
Supply voltage
Output signal
Scale range
9
EN