Electrical Connection - Palazzetti ECOFIRE MEGHAN Notice D'installation Et D'entretien

The refractory wall support (G) can be regulated
using the adjustment screws (H).
• Position the bottom refractory wall (B) in the
combustion chamber (Fig. 23).
• Insert the bottom wall (B) into the side profile
of the left wall (A) and check that it is resting on
the burn pot holder.
B
A
54
G
H
Fig. 22
B
Fig. 23
• Position the right refractory wall (C) in the com-
bustion chamber (Fig. 24) by slightly lifting the
bottom wall (B).
• Insert the bottom part of the right wall (C) into
the side profile of the bottom wall (B) and check
that it is inserted in the slot in the support (G)
• Reposition the burn pot (F)
B
G

6.5 Electrical connection

Simply connect the appliance to the electrical
system using the supplied plug (Fig. 25).
The electrical connection (plug) must be easily
accessible after appliance installation as well.
If the power supply cable is damaged
it must be replaced by the technical
assistance service or a qualified techni-
cian in order to prevent any risk.
F
C
C
Fig. 24
004778570 - 11/11/2020