Transportation; Checking The Floor Where The Appliance Will Be Placed - Palazzetti ECOFIRE MEGHAN Notice D'installation Et D'entretien

• Removal from the transport pallet
To remove the appliance from the transport
pallet, follow the instructions given in the at-
tached "Product Booklet".
Disposal can be entrusted to a third party, provid-
ed only companies authorised for the recovery
and elimination of the materials in question are
used.
Always follow the regulations in force in the
country in which the appliance is being used for
disposal of materials and possibly for the disposal
report.

4.1 Transportation

Make sure that the lifting carriage has a
payload higher than the weight of the
appliance to be lifted. The full responsi-
bility of the lifting of loads lies with the
person handling the lifting equipment.
Pay particular attention to protecting
wooden flooring or parquet floors in
order to avoid possibly ruining them
due to the weight of the appliance
when moving it.
During lifting, avoid jerking or abrupt movements.
Pay attention to overbalancing.
004778570 - 11/11/2020
ITALIANO ENGLISH
Fig. 3
DEUTSCH
4.2 Checking the floor where the
appliance will be placed
Check the load capacity of the floor slab.
If a floor is not suitable for supporting the
weight of the appliance, install appropriate
steel plates (A - Fig. 4) or concrete base (A - Fig.
5) equipped with
mesh (B - Fig. 5) to distribute the weight.
For the dimensions of the plates and
the concrete base, use a qualified
technician.
A
A
B
FRANÇAIS ESPAÑOL
10x10x6 electro-welded
10 mm
Fig. 4
Fig. 5
45