Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Video (composite video)
Composite video
connection
Connecting Audio
A variety of audio connections are available:
•
You can connect a dynamic microphone to the Mic port and output the sound through the projector.
•
You can also output computer audio. If you connected the computer using a VGA cable, you need to
connect an optional 3.5 mm stereo mini-jack audio cable for sound. If you are using more than one audio
connection, label the cables Audio1 or Audio2.
•
If you connected the computer using an HDMI, USB Display, or Ethernet cable, you can output both video
and audio through the cable.
•
To enhance the sound from your presentation, you can connect the projector to amplified or self-powered
external speakers. The volume can be controlled using the projector's remote control.
If you want to output audio from the external speakers (or use the microphone) when the projector is turned
off, you need to adjust the Standby Setup settings in the projector's Extended menu. In Standby mode, you
can output only Computer1 or Computer2 audio or composite audio (red and white RCA connectors).
LAN connection (video and audio)
RCA audio
connections
Microphone connection
S-video connection
External speaker connection
11
HDMI connection
Component to VGA
connections
HDMI connection
Computer1 audio
(video & audio)
connection
Computer2 audio
connection
Publicité
Table des Matières
