Hewi 802 LifeSystem Série Notice De Montage Et Mode D'emploi page 5

Warning
· The HEWI backrest rail is designed for a maximum
static working load of 50 kg horizontally.
· A certain amount of horizontal sag under load is
normal. In case of damage, e.g. exceeding of the
working load, the backrest rail must no longer be
used.
· Do not use the backrest rail for any purpose other
than that for which it is intended, e.g. do not use it as
gymnastics equipment or as a climbing aid or step.
· Improper installation/use can cause accidents and
injuries.
· Mounting only by persons familiar with mounting of
the product and appropriate qualifications for their
activity.
· Please use screw machines with extended bit accep-
tance as otherwise the drill chuck may damage the
surface.
· The wall on which the backrest rail is to be installed
must be flat, firm and capable of taking the load.
Only use fixing materials approved by the wall an-
chor manufacturer for the intended purpose. In case
of doubt, contact HEWI's sanitary products customer
service tel. +44 1634 258200 (UK), +49 5691 82-0
(International).
· After installing perform a functional test.
· On acceptance the product must be checked for
damage; any defects must be reported immediately.
The product must be stored in a dry place and free
from pressure, e.g. no other items stacked on top
of it.
· The installer must pass on the installation and use
instructions to the user and they must be kept for
the whole life of the product.
· The HEWI backrest rail may only be used in combi-
nation with HEWI hinged support rails item number
802.50... from the LifeSystem range or as individual
products with roses item number 802.50.070..
Maintenance
The HEWI backrest rail is not maintenance-free!
It must be checked monthly by qualified personnel to
ensure that it is in perfect working order. In case of
defects (e.g. braking force too small) the relevant steps
given in the installation and use instructions must be
taken.
Montagehinweis | Mounting information | Consigne de montage | Montagetip
Indicazioni per il montaggio | Indicaciones de montaje | Wskazówki do montaż u
Care and cleaning instructions
HEWI products are easy care and easy to clean.
Frequently, occasional wiping with a damp cloth
is sufficient. If using cleaning products the following
should be noted:
· Only use cleaning products with a pH value
between 6 and 8.
· Cleaning products that contain detergents such
as phosphates, soaps and tensides (surfactants)
as their active substances can be used.
· Please note and follow the cleaning product manu-
facturers' instructions (concentration, contact time).
· Do not use alkali, acidic or chlorine-based cleaning
products or cleaning products with scouring agent
additives.
· Do not use any scouring cleaning equipment, e.g.
brushes.
· Do not apply the cleaner directly to the surface,
but always pour it on the cleaning cloth instead.
Disclaimer
HEWI does not accept any liability whatsoever for
personal injuries or damage to property that is or
has been caused due to incorrect assembly, installa-
tion or use, especially due to disregard of the listed
warnings and safety instructions.
Disposal
Proper disposal is subject to the applicable national
statutory regulations.
HEWI | 5