Care And Maintenance; Replacing The Hip™ Ultra Cleaning Solution - SciCan HYDRIM C61w G4 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6. Care and Maintenance

6.1 Replacing the HIP™ Ultra cleaning solution
Only replace the cleaning solution with HIP™ Ultra cleaning solution, which is used in dilute
form as a detergent for the cleaning of surgical instruments in the HYDRIM washer.
It is a colourless and almost odourless liquid that is completely soluble in water.
Some precautions must be taken to safely handle this chemical. For more information,
see section 3.2 Handling and Installing the HIP™ Ultra cleaning solution.
NOTE: To avoid spillage, replace the solution container only when the message appears
and be sure to wear gloves.
When a red X appears on the water softener/detergent icon. Press on the icon to determine
if the problem is with the water softener or cleaning solution level. If the cleaning solution
must be replaced, a red X will appear next to it.
To replace the cleaning solution, follow these steps:
Spare part#: CS-HIPC-U (8 x 750 mL), HIP™ Ultra cleaning solution.
1
2
3
Turn the power OFF,
open the door and pull out
the chemical drawer.
4
5
6
1
7
2
3
Disconnect the cleaning
solution connector.
4
5
6
7 1 2
Page 30
3
4
5
6
7
Remove the empty cleaning
solution bag and discard
or recycle it.

Publicité

Chapitres

Table des Matières
loading

Table des Matières