Connecting To A Wireless Network - SciCan HYDRIM C61w G4 Manuel De L'utilisateur

3. Setting up your HYDRIM
3. Type the IP address displayed on the touchscreen into the browser of any web enabled
device to access your unit's web portal. When the Network icon is active (for example when
sending email) it will turn green.
NOTE: Use QR code if connecting to a mobile device.
NOTE: Connection time will vary depending on your network speed, and making an initial
connection can take longer.

3.23 Connecting to a wireless network

The HYDRIM can be configured for wireless use by connecting the Ethernet port to an
external wireless bridge / access point. SciCan currently recommends the use of the
® ®
D-Link DAP-1522 Xtreme N Duo Wireless Bridge. Contact your network administrator
to learn more about setting up a wireless bridge.
Page 18