Adjusting Screensaver Delay; Turning The Button Sound On Or Off; Adjusting Button Beep Volume - SciCan HYDRIM C61w G4 Manuel De L'utilisateur

3. Setting up your HYDRIM
3.12 Adjusting the screensaver delay
To change the length of time before the screensaver is activated, follow these steps:
1.
2.
Scroll to
3.
Use
time you require, press it. Press
3.13 Adjusting the temperature display
1.
2.
Scroll to
3.
Use
Fahrenheit. Press

3.14 Turning the button sound ON or OFF

The HYDRIM is preset to beep when a button is pressed. If you would like to turn the button
sound off, follow these steps:
NOTE: Turning OFF the button sound does NOT turn off other alarms and cycle notification
beeps.
1.
2.
Scroll to
3.
Use
Press
3.15 Adjusting the button beep volume
If you would like to adjust the beep volume, follow these steps:
1.
2.
Scroll to
3.
Use
pressing it. Press
Screensaver
and select.
to scroll through your time options. When you have found the amount of
Temperature C/F
and select.
to choose between having information displayed in degrees Celsius or
to save and return to the Setup menu.
Beep ON/OFF
and select.
to scroll through your ON or OFF options and select it by pressing it.
to save and move back to the Setup menu.
Beep Volume
and select.
to scroll through the volume settings. Select the one you want by
to save and move back to the Setup menu.
Page 14
to save and return to the Setup menu.