Before The First Use - Linea 2000 Domo DO221SV Mode D'emploi

Aspirateur-balai
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
· All repairs should be carried out by the manufacturer or its aftersales service.
· Never immerse the appliance, the cord or the plug in water or any other liquid.
· Make sure that children do not touch the cord or appliance.
· Keep the cord away from sharp edges and hot parts or other heat sources.
· Before use, remove all packaging materials and any promotional stickers.
· Do not use the vacuum cleaner to vacuum up detergents, liquids, needles, matches and
other similar liquids, sharp objects or flammable objects.
· Do not use the vacuum cleaner to vacuum up cement, powder and other small particles.
Also avoid vacuuming up large objects. The vacuum cleaner could be clogged, the motor
could overheat or other damage may occur.
· Make sure that the air intake or the floor suction opening do not become blocked.
· Make sure that the machine does not come into contact with liquids.
· First charge a new battery up completely.
· Pull the plug from the outlet when the vacuum cleaner is fully charged.
PARTS
1.
On-off button
2.
Speed control
3.
Battery charge indicator
4.
Unlock button for dust reservoir
5.
Dust reservoir
6.
Release button floor nozzle
7.
Floor nozzle with rotating floor brush
8.
Adaptor
9.
Wall mount

BEFORE THE FIRST USE

To set up the machine properly, please follow the steps below:
1.
Place the handle on the base and fix with the supplied screw. Make sure that no wiring is
trapped between the components.
2.
Make sure the floor nozzle is clicked into the stick vacuum cleaner.
3.
Click the dust reservoir into the stick vacuum cleaner.
24
DO221SV
1
2
3
5
4
6
7
9
8

Publicité

Table des Matières
loading

Table des Matières