Registering The Product - Zodiac Z300 Notice D'installation Et D'utilisation

Why is my heat pump • On start-up the device remains on «pause» for 3 minutes before actually starting up: check
not heating?
• Once the pool has reached the set-point temperature, the heat pump switches off: check
• If the water flow-rate is zero or inadequate, the heat pump will stop: check that water is
• When the outside temperature drops below 5 °C for standard models or -8 °C for
• The heat pump may have detected a malfunction: check if an error code is displayed on
• If the problem persists after you have checked all of the above points: contact your
Where should my • The water treatment system (chlorinator, salt chlorinator, etc.) must be installed preferably
water treatment
system be positioned
with respect to the
heating system?
The heat pump is • Your heat pump will give off water in the form of condensation. This water is the humidity
giving off water: is this
normal?
• Note: your device can produce several litres of water per day.

6. Registering the product

Register your product on our website:
-
be the first to be informed of new Zodiac® products and special offers,
-
help us to constantly improve our product quality.
Europe & Rest of the World
America
Australia – Pacific
11
that this period has passed
that the water temperature is lower than the requested temperature (see §3.2)
flowing correctly through the heat pump, and check the hydraulic connections
reversible models, the heat pump will stop: check the outdoor temperature
the screen, if so refer to §5.1
installer
downstream from the heat pump (see installation §2.4), and must be compatible with the
latter (check with the manufacturer)
contained in the air, which condenses on contact with certain cold components inside the
heat pump.
www.zodiac-poolcare.com
www.zodiacpoolsystems.com
www.zodiac.com.au
H0439100.C - EN - 2015-01