Troubleshooting; Cleaning And Maintenance; Warranty - Dometic SEITZ Instructions De Montage Et De Service

Troubleshooting

5 Troubleshooting
The flyscreen or blackout roller blind cannot be moved.
➤ Check the guide rails for dirt.
➤ Clean the guide rails if necessary.
The tension of the spring drive is insufficient
➤ Re-tension the spring drive or replace it.
6

Cleaning and maintenance

A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning
as these may damage the product.
➤ Occasionally clean the product with a damp cloth.
➤ Spray the sliding surfaces of the guide rails periodically with small
amounts of silicone spray to achieve the smoothest possible sliding of the
handle strips in the guide rails.
➤ To prevent material fatigue, do not keep the blind closed for long periods
of time.
➤ If the vehicle is stationary for long periods of time, engage the blackout
roller blind in the highest catch point and the flyscreen in the lowest catch
point. This is to prevent the formation of mildew.
7

Warranty

The statutory warranty period applies. If the product is defective, please
contact your retailer or the manufacturer's branch in your country (see the
back of the instruction manual for the addresses).
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
20
Dometic
EN