Installation Du Cutter - Atom LEGEND R2 Manuel D'utilisation Et De Maintenance

Table des Matières

Publicité

4-3 Installation du cutter

4-3 Cutter position
Faites passer le câble du sectionneur dans
la fenêtre du rabat inférieur du conteneur de
secours, puis dans le tunnel textil du rabat latéral
gauche du conteneur réserve.
Route the cutter cable through the window of the
lower reserve container flap, then in the tunel
textil of folds it back lateral left of the container
reserve.
Insérer le sectionneur dans son tunnel élastique.
Insert the cutter into its elastic tunnel.
nOtA:
Le trou du sectionneur est volontairement
centré sur le bord supérieur de l'oeillet.
NOtA:
the hole of cutter is intentionally centered on
the upper edge of the grommet.
Lire, suivre, appliquer les AVERTISSEMENTS, RECOMMANDATIONS, ET INSTRUCTIONS de ce manuel /
Read and follow all WARNINGS, WARRANTY, INSTRUCTIONS for products of this manual.
Manuel d'utilisation et de maintenance/ Use and maitain manual
LEGEND R²
Parachutes de France/ Aérazur
-25-63-48
Ed 10 - Septembre 2012
9/8

Publicité

Table des Matières
loading

Table des Matières