Noise Information; Inserting/Replacing The Battery - Bosch LR 2 Professional Notice Originale

OBJ_BUCH-821-003.book Page 15 Thursday, December 20, 2012 12:37 PM
5 Magnet plate
6 Direction LED "move downward"
7 Centre-indication LED
8 Centre mark
9 Direction LED "move upward"
10 Reception area for the laser beam
11 Latch of battery lid
12 Serial number
13 Battery lid
14 Mounting hole for M6 thread
The accessories illustrated or described are not included as standard delivery.
Display Elements
a Audio signal indicator
b Direction indicator "move upward"
c Centre indicator
d Direction indicator "move downward"
e Battery low indicator
f "Coarse" adjustment indicator
g "Fine" adjustment indicator

Noise Information

The A-weighted sound pressure level of the audio signal at one meter distance
is 80 dB(A).
Do not hold the measuring tool close to your ear!
Assembly

Inserting/Replacing the Battery

Alkali-manganese batteries are recommended for the measuring tool.
Pull the latch 11 of battery lid outward and open the battery lid 13.
When inserting the battery, pay attention to the correct polarity according to the rep-
resentation on the inside of the battery compartment.
When the battery low indicator e appears for the first time on the display 4, the meas-
uring tool can still be operated for approx. 2 h.
 If the measuring tool is not used for a long period of time, the battery must be
removed. The battery can corrode or discharge itself over long periods.
Bosch Power Tools
English | 15
1 609 92A 05F | (20.12.12)