Cycle Guide - Whirlpool WGD49STBW Guide D'utilisation Et D'entretien

Cycle Guide — ACCUDRY
Not all cycles and settings are available on all models.
ACCUDRY™ - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Choose ENERGY PREFERRED cycle for optimal energy savings.
Items to dry: Dryness Level:
Jeans, heavy work
clothes, towels
Energy Preferred
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE: If loads do not seem as dry as you would like, select More Dry or Very Dry next time you dry a similar load. If loads seem drier
than you like, select Less Dry next time you dry a similar load.
Cycle Guide — Timed Dry Cycles
TIMED DRY - Will run the dryer for the specified time on the control.
Not all cycles and settings are available on all models.
Items to dry:
Large or heavy Heavy Dry
items such as thick
towels or robes
Any load Damp Dry
Rubber, plastic, Fluff Air
heat sensitive
fabrics
Cycle Guide — Steam Refresh Cycle (steam models only)
Not all cycles and settings are available on all models.
Items to dry:
Any load Steam Refresh
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High temperature setting may be used for drying
heavyweight items such as towels and work clothes.
An Ex Low or Low to Medium temperature setting may
be used for drying medium-weight items such as sheets,
blouses, dresses, underwear, permanent press fabrics, and
some knits.
6
/Automatic Dry Cycles
™
Temperature:
Very Dry High
More Dry
Medium or
Less Dry
Low
Low
Cycle: Temperature:
Sanitize
Any
No Heat
Cycle: Temperature:
High
Available
Options:
Cycle Signal
Wrinkle Shield
Available
Options:
Temperature Choose high to dry large or heavy loads.
Dries items to a damp level or for items that do not require
an entire drying cycle.
No heat drying.
Available
Options:
Cycle Signal This cycle is best for reducing wrinkles and odors
from 2 or more dry items. Cycle time will increase
depending on number of items.
Use the Air Dry or Fluff Air (no heat) setting for foam, rubber,
plastic, or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle Details:
Automatic cycles give the best drying in the
shortest time. Drying time varies based on
fabric type, load size, and dryness setting.
Select a drying temperature based on the
fabrics in your load. If you are unsure of the
temperature to select for a load, select the
lower setting rather than the higher setting.
Cycle Details:
Cycle Details: