Cycle Guide - Whirlpool YNED4655EW Guide D'utilisation Et D'entretien

CYCLE GUIDE — AUTOMATIC DRY CYCLES
Not all cycles and settings are available on all models.
Items to dry:
Jeans, heavy work clothes,
towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE: If loads do not seem as dry as you would like, select Very/More Dry next time you dry a similar load. If loads seem drier than
you like, select Less Dry next time you dry a similar load.
CYCLE GUIDE — TIMED DRY CYCLES
Not all cycles and settings are available on all models.
TIMED DRY - Will run the dryer for the specified time on the control.
Items to dry:
Large or heavy items such
as thick towels or robes
Any load
Any load
Rubber, plastic, heat
sensitive fabrics
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High temperature setting may be used for drying
■
heavyweight items such as towels and work clothes.
A Low to Medium temperature setting may be used for
■
drying medium-weight items such as sheets, blouses,
dresses, underwear, permanent press fabrics, and some
knits.
6
Dryness Level:
More Dry/Very Dry
Energy Preferred
Less Dry
More Dry/Very Dry
Energy Preferred
Less Dry
More Dry/Very Dry
Energy Preferred
Less Dry
Cycle:
Heavy Duty/
Heavy Dry
Damp Dry
Tumble Press
®
Air Dry/No Heat
No Heat Fluff
Temperature:
High Automatic cycles give the best drying in the
shortest time. Drying time varies based on fabric
type, load size, and dryness setting.
Select a drying temperature based on the fabrics
in your load. If you are unsure of the temperature
Medium
to select for a load, select the lower setting rather
than the higher setting.
Low
Temperature:
Any Choose high to dry large or heavy loads.
Any Dries items to a damp level or for items that do not
require an entire drying cycle.
Any Use low to medium temperature to smooth out
wrinkles, such as those found in clothes packed
in a suitcase or in items wrinkled from being left in
the dryer too long.
N/A No heat drying.
Use the Air Dry/No Heat or No Heat Fluff setting for foam,
■
rubber, plastic, or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
■
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle Details:
Cycle Details: