Check Your Vent System For Good Air Flow; Use Accudry™/Automatic Dry Cycles For Better Fabric Care And Energy Savings - Whirlpool WGD49STBW Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Check Your Vent System for Good Air Flow

Good air flow
Along with heat, dryers require good air flow to efficiently
dry laundry. Proper venting will reduce your drying
times and improve your energy savings. See Installation
Instructions.
The venting system attached to the dryer plays a big role
in good air flow. Blocked or crushed vents as well as
improper venting installation will reduce air flow and dryer
performance.
Service calls caused by improper venting are not covered
by the warranty and will be paid by the customer, regardless
of who installed the dryer. To clean or repair venting, contact
a venting specialist.
Use ACCUDRY™/Automatic Dry Cycles for Better
Fabric Care and Energy Savings
Use the ACCUDRY™/Automatic Dry cycles to get the most energy savings and enhanced fabric care from the dryer. During
ACCUDRY™/Automatic Dry cycles, drying air temperature or moisture level are sensed in the load. This sensing occurs
throughout the drying cycle and the dryer shuts off when the load reaches the selected dryness. The Energy Preferred cycle
will provide optimal energy savings.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying.
Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.
4
Maintain good air flow by:
Cleaning your lint screen before each load.
Replace plastic or foil vent material with 4" (102 mm)
diameter heavy, rigid vent material.
Use the shortest length of vent possible.
Use no more than four 90° elbows in a vent system;
each bend and curve reduces air flow.
Good
Remove lint and debris from the exhaust hood.
Remove lint from the entire length of the vent system at
least every 2 years. When cleaning is complete, be sure
to follow the "Installation Instructions" supplied with your
dryer for final product check.
Clear away items from the front the dryer.
Better

Publicité

Table des Matières
loading

Table des Matières