Whirlpool WGD49STBW Guide D'utilisation Et D'entretien page 8

3.
Select the desired cycle
Select the desired cycle for your load. See the Cycle Guide
for more information about each cycle.
ACCUDRY™/AUTOMATIC DRY Cycles
You can select a different dryness level, depending on your
load, by turning the knob to dryness level.
Selecting More or Very Dry, ENERGY PREFERRED, or Less Dry
automatically adjusts the dryness level at which the dryer will
shut off. Once a dry level is set, it cannot be changed without
stopping the cycle.
ACCUDRY™/AUTOMATIC DRY cycles give the best drying in
the shortest time. Drying time varies based on fabric type, load
size, and dryness setting.
Steam Refresh
Reduces odors and wrinkles from small to medium-sized loads
of dry items. Dry time will automatically adjust when the load
size is sensed. Medium or High Temp Levels may be selected.
4.
Set cycle settings, if desired
Turn the TEMPERATURE knob to change the drying
temperature setting. See "Setting the Drying Temperature".
NOTE: Not all settings are available with all cycles.
8
5.
Set Wrinkle Shield, if desired
(depending on model)
Get 90 minutes of heat-free, periodic tumbling at the end
■
of a cycle. Turn the WRINKLE SHIELD™ knob to select
on or off at any time before the cycle has ended.
The Wrinkle Shield cycle on some models is automatically
■
set to run for up to 40 minutes of no-heat, periodic
tumbling at the end of the cycle.
NOTE: Not all options and settings are available with all
cycles.
6.
Select Cycle Signal, if desired
Turn the CYCLE SIGNAL knob to select the desired setting
(On or Off). The Cycle Signal produces an audible sound
when the drying cycle is finished. Promptly removing clothes
at the end of the cycle reduces wrinkling.
NOTE: When the Wrinkle Shield™ setting is selected and the
Cycle Signal is on, the tone will sound every 5 minutes until
the clothes are removed, or the Wrinkle Shield™ setting ends.
7.
Press PUSH to START to
begin cycle
Push and hold the PUSH to START knob to begin the cycle.
Promptly remove items after cycle has completed to reduce
wrinkling. Use the Wrinkle Shield™ feature to avoid wrinkling
when you are unable to remove a load from the dryer as soon
as it stops.