Proper Use; Technical Data; Before Starting The Equipment; Mains Connection - EINHELL GC-RS 2540 Instructions D'origine

3. Proper use

This electric garden refuse shredder is designed
only for shredding organic garden waste. Place
biologi-cally degradable material, e.g. leaves,
branches, dead fl owers etc., into the loading fun-
nel inlet.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Voltage: ......................................... 230 V ~ 50 Hz
Power rating: ........................... 2500 W (S6-40%)
..........................................................2000 W (S1)
Cutting unit idling speed ..........................40 min
Branch diameter: .............................. max. 40 mm
L sound pressure level: ...................... 80 dB (A)
pA
K uncertainty .......................................... 3 dB (A)
L sound power level: ......................... 93 dB (A)
WA
Weight: .....................................................25.1 kg
Protection class:.................................................. I
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Anl_GC_RS_2540_SPK7.indb 15 Anl_GC_RS_2540_SPK7.indb 15
GB
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
Assembly (Fig. 3)
-1
•
Take all the parts out of the packaging.
•
Fit the chassis to the housing using the four
lock nuts (Item 2).
•
Fit the axle (Item 3) to the chassis using the
two M6 x 50 screws (Item 4) and nuts (Item
2).
•
Push the wheels (Item 5) onto the axle.
•
Secure the wheel cover (Item 6) on the axle
using a hammer.
•
Press the wheel caps onto the wheels.
6. Operation
Please observe the statutory regulations gover-
ning noise abatement during operating times,
which may diff er from town to town.

6.1 Mains connection

Connect the device with an extension lead con-
nected to the power plug (Fig. 1/Item 7). Be sure
to observe the relevant information in the safety
instructions.
- 15 -
15.07.15 10:31 15.07.15 10:31