Heating The Device While Empty; Inserting Accessories; Using The Grill Rack - Medion MD 17495 Mode D'emploi

 Connect the microwave to a convenient and easily accessible earthed mains socket.

8.2. Heating the device while empty

Before using the microwave, you must first heat it up whilst empty in order to re-
move any residues left over from production. Turn on the device without any food
and without accessories as described below in convection air mode:
 Open the door and remove any remaining packaging or accessories from the
oven.
Close the door again afterwards.
 Press the
button.
100 °C appears on the display.
 Press the
or
 Press the
button to confirm the setting.
 Press the
or
 Press the
button again to start the heating process.
NOTE
During this initial heating period you may notice faint odours. These
smells are not dangerous and will disappear after a short time. Ensure ade-
quate ventilation e.g. by opening a window.
 After 10 minutes, the device turns itself off automatically. Wait until it has com-
pletely cooled down.
 Disconnect the plug from the mains socket and then clean the device once more
inside and out with a damp cloth and dry the microwave off carefully.

8.3. Inserting accessories

When you have heated the microwave once in an empty
state as described above, it may no longer be used without
the rotary plate inserted properly.
 Place the roller ring in the centre of the recess in the
cooking area.
 Place the rotary plate over the centre of the drive axis.

8.4. Using the grill rack

In grill mode, the grill rack can be used in two
positions.
If you place the grill rack's long feet onto the
rotary plate, the food will be browned faster
because it is nearer to the heating element on
the grill.
If you place the grill rack's short feet onto the
rotary plate, the food will be browned more
slowly because it is further away from the heating element on the grill.
66 of 170
buttons to select the cooking temperature 190 °C .
buttons to set a cooking time of 10 minutes.