Scan Two-Sided Documents From The Adf; Make Copies From The Adf - HP Scanjet 7600 Série Guide De L'utilisateur

Scan two-sided documents from the ADF

1 Load your originals. See "Load originals in the ADF" on page 10.
2 Open HP Director. Click the Scan Document button in HP Director.
3 The HP Scanning dialog box appears.
4 Under Would you like to scan both sides of the original(s)? select Yes, scan
both sides, and then click Scan.
5 When you are finished scanning click Done, the software sends the scanned file to
the specified location.
One-sided scanning is the default method for the ADF. To change this default to two-
sided scanning, open HP Director on your desktop, click Settings, click Scan Settings
and Preferences and then click Scan Preferences. Click the Automatic tab, and then
select the setting that you want to assign as the default.
Note Not all page sizes can be scanned two-sided. See "Choose acceptable media
for the ADF" on page 10 for more information about media.
If you are acquiring your scan from an imaging software program using TWAIN, the HP
Scanjet 7600 series Document ISIS/TWAIN software offers additional capabilities for
brightness and contrast, and improved performance and control for two-sided scanning.
For more information about installing the HP Scanjet 7600 series Document ISIS/TWAIN
software, see "Installing scanner software" on page 2.

Make copies from the ADF

You can use the Copy button (
them to a printer. The copy function defaults to the setting used the last time you made
copies. For more information, see "Make copies" on page 8.
User's manual
) to scan multiple originals from the ADF and send
11