HP Scanjet 7600 Série Guide De L'utilisateur page 20

Chapter 3
If you want more control of the final selection area of the image for scanning, select
Show Preview in the HP Scanning dialog box, or use the Scan Slides/Negatives
button in HP Director. In the Preview dialog box, you can select the area of the slide or
negative that you want to scan. Click and hold a selection handle and adjust the area to
frame the final scan area of the image. You must then click the Accept button in the
preview screen to initiate the scan. The software sends the image to HP Image Zone.
Final scan area
Note For information about rotating the image, adjusting color or size, or making other
changes to the image, see "Edit an image in the preview" section of the onscreen Help.
Find troubleshooting information
For more information about resolving issues related to the TMA, and scanning slides or
negatives, go to the onscreen Help in HP Director. Click Director Help and in the
Contents tab, click the HP Scanjet 7600 series scanner heading. Open the folder by
clicking the plus sign (+) and then click Troubleshooting, where you will find the
Transparent materials adapter (TMA) problems section.
16 HP Scanjet 7600 series scanner