Brinkmann 810-3250-F Instructions D'assemblage Et D'utilisation page 34

Step 16
Insert four M6 X 12 mm bolts
halfway into legs. Place the right
side table keyholes over bolts on the
right side of grill body assembly.
Tighten bolts securely.
M6 X 12 mm Bolts
Step 17
Loosen bolts on side burner bracket
before attaching side burner valve to
the side burner assembly. Insert the
side burner valve assembly through
the corresponding keyholes on the
side burner front panel and bezel,
then firmly seat the valve nozzle into
the burner venturi. Depending on
the side burner valve, you will be
using either the outside key holes
(Figure 1), or the inside key holes
(Figure 2). Pull the valve downward
or upward to lock into place. Then
tighten the two bolts.
Figure 1
Step 18
Attach side burner igniter lead wire
to electrode wire as illustrated.
33
Side Burner
Figure 2
Right Side Table
Valve
Valve
Nozzle
Valve
Nozzle
Side
Burner
Valve
Side Burner
Igniter Lead
M6 X 12 mm Bolts
Burner Venturi
Burner Venturi
Electrode
Bolts