Step 10
Attach tank block bar and door stop
to cart base and back panel using
M6 X 12 mm bolt, one M6 nut and
two M6 X 15 flat head bolts.
M6 X 15 mm
Flat Head Bolts
Door Stop
Step 11
Attach one handle support using
two M6 x 12 mm bolts. Then insert
cart door handle into handle support
over handle and attach using two
M6 x 12 mm bolts. Repeat for
the other handle.
Step 12
Thread bottom door pivots into the
holes at the bottom of both doors to
attach as shown.
31
M6 X 12 mm Bolts
Tank Block Bar
M6 Nut
Handle
Supports
Cart Door Handles
M6 X 15 mm
Flat Head Bolts
Door Stop
M6 X 12 mm Bolts
Bottom Door
Pivots